Idler TerraCycle SPORT, Power 23 tooth, OD 98 mm

Incl. 19% Tax

  • 23 tooth aluminium cog

  • Outside diameter: 98 mm

  • Inside diameter: 8 mm or 10 mm

  • Bearings: ABEC7

  • Cog: 7075 aluminium, CNC machined

  • Carrier: 7075 aluminium, CNC machined, anodized

  • Side plates: aerospace grade ballistic nylon

  • Bolts: 18/8 stainless

  • Weight: 100 g

  • Fits HP Velotechnik Scorpion, HP Velotechnik Grasshopper, HP Velotechnik Gekko, HP Velotechnik Streetmachine and Speedmachine, Flux C 500, S 800, S 850, S 600, S 650 und S Comp and other recumbents with large pulleys.

* Required Fields

Incl. 19% Tax


CNC machined idler cogs with tight tolerances deliver more power to your drive train and are quieter, smoother, and allow the chainline to run with less vibration. The drive train is one place on a bike that deserves the best parts you can afford. Because of the long lengths of chain that recumbents with rear wheel drive have, a quality idler system is really key. Everywhere else in the power side of your drive train (chainrings and cassette) toothed cogs are used. Why should the idler be any less important? Running a loaded chain over a non-cogged surface causes friction and power loss as the chain attempts to dig itself a groove in the plastic idler, or worse yet, with harder plastic idlers, the chain simply bumps its way along from the drive wheel. A chain has a very specific shape that is designed to run on only one thing when loaded- a tooth cup. Don't let anyone tell you anything different because any good engineer will tell you that simply isn't the case. Chains are not smooth and continuous, they are metal segments with specific contact points designed in. The TerraCycle idlers perfectly designed transferring chain power to the rear wheel of your recumbent bike or trike with the CNC machined cog made of leightweight 7075 aluminum.


All TerraCycle idler contact points are metal-to-metal joint from the CNC machined idler cog and idler carrier down to the industry grade ABEC 7 bearings. No plastic is involved in order to dismantle the idler cog from the idler carrier.


Each idler is fully rebuildable (bearings and cog are replaceable of course) if that ever becomes necessary.


TerraCycle idlers initially cost more, but if you factor in the longevity, the fact that they are not prone to failure, plus the minimized noise level and pedaling efficiency you will gain, then they really are a great value!


Handmade in the most cycling friendly city Portland, OR USA.


Read the Velovision Magazine Review "TerraCycle Idlers"

Reviews/Velovision Issue 34 June 2009

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Be the first to review this product


Only registered users can write reviews. Please, log in or register

Additional Information

Item number 2465
Manufacturer TerraCycle
You might also like

Chain YABAN S8CR 8speed or S9S2 9speed

Incl. 19% Tax

Chain Wax Super Dry Green Oil, 100 ml

Incl. 19% Tax

Chain lube Green Oil 100 ml

Incl. 19% Tax

Chain YABAN S10C 10speed

Incl. 19% Tax



Delivery conditions

We deliver with

Germany 6,90 Euro
EU 9,90 Euro
Switzerland and Norway 19,90 Euro

Terms of Payment


Novalnet Payment Service Provider

Secure Shopping

For a relaxed shopping experience, we offer secure data traffic with SSL encryption.

SSL Certificate